3
3. Safety sticker
3.1
The sticker should be positioned so that
it is easily visible to the driver without
hindering the view.
3.2
The sticker is self-adhesive. The surface
to which the sticker is attached must be
thoroughly cleaned.
4. Assembly instructions for the lower
brake
4.1
For rotator and swing damper
4.1.1 Check that the bushings are correctly
attached and that the required number of
lubrication holes are present.
4.1.2 Fit the pins
A
so that the stop is turned
downwards. Fit the locking rings
B
and
secure them with clamping rings
C
(with the groove turned outwards).
4.2 Dismantle
4.2.1 Dismantle in the reverse order. Make
sure that the grapple/harvesting head
and rotator are steady. Prize the clam
ping rings loose
C
possibly using a
grooving chisel. Then loosen the locking
rings
B
and then remove the pins
A
.
4.3
Assembly of the brake system
4.3.1 Assemble the brake discs
D
so that the
feet are turned downwards, towards
the rotator. Worked surface
X
turned
towards the brake lining.
4.3.2 Assemble the brake lining
E
so that the
feet are turned upwards, away from the
rotator. Incorrect fitting will damage the
rotator.
