Indesit KP9508CXG Operating Instructions Manual Download Page 5

5

G

B

Start-up

 

and

 

use

Setting

 

the

 

time

In order to use the timer, it must be wound by turning
the TIMER knob almost one complete turn in the
clockwise direction  

. Then, turning it back  

, set

the desired time by lining up the number for the
minutes with the mark on the control panel.

U

sing

 

t

h

e

 

o

v

en

! The first time you use your appliance, heat the empty
oven with its door closed at its maximum temperature
for at least half an hour. Ensure that the room is well
ventilated before switching the oven off and opening the
oven door. The appliance may emit a slightly
unpleasant odour caused by protective substances
used during the manufacturing process burning away.
! Never put objects directly on the bottom of the oven;
this will avoid the enamel coating being damaged.

1. Select the desired cooking mode by turning the
SELECTOR knob.
2. Select the recommended temperature for the
cooking mode or the desired temperature by turning
the THERMOSTAT knob.
A list detailing cooking modes and suggested
cooking temperatures can be found in the relevant
table (see Oven cooking advice table).

During cooking it is always possible to:
• Change the cooking mode by turning the

SELECTOR knob.

• Change the temperature by turning the

THERMOSTAT knob.

• Stop cooking by turning the SELECTOR knob to

the “0” position.

! Always place cookware on the rack(s) provided.

TH

ER

M

OS

T

A

in

d

icator

 

lig

h

t

When this is illuminated, the oven is generating heat.
It switches off when the inside of the oven reaches
the selected temperature. At this point the light
illuminates and switches off alternately, indicating
that the thermostat is working and is maintaining the
temperature at a constant level.

Ov

en

 

lig

h

t

This is switched on by turning the SELECTOR knob
to any position other than “0”. It remains lit as long as
the oven is operating. By selecting 

&

 with the knob,

the light is switched on without any of the heating
elements being activated.

C

oo

k

ing

 m

o

d

es

 f

or

 

electric

 

o

v

en

The maxi-oven gives four combinations of heating

elements;  so  the  most  suitable  type  of  cooking  for

each dish may therefore be chosen, with convincing

results.

By turning the knob of the selector switch marked
with the symbol 

, different cooking functions are

obtained, as shown in the following table:

Symbol     Function

Power

0

 0) Off

-

 1) Top + Bottom heating
     elements

2350 W

 2) Bottom heating element

1300 W

 3) Top heating element

1050 W

 4) Grill heating element

2000 W

After having selected the heat source, put the
thermostat knob (marked with the symbol 

) to

the temperature required.

• For normal cooking (roasts, biscuits, etc.) in

conventional mode use the  function 

 (hot

above+below). Only put the food to be cooked

into the oven when it has reached the selected

temperature and preferably use just one shelf for

cooking.

• To provide heat only to the bottom or the top part

of the dishes, turn the selector to the position 
(hot below) or 

 (hot above);

• Grill operation: a high heat output is used for

grilling, so that the surface of the food is

immediately  browned;  this  is  particularly  indicated

for meats which should remain tender inside. To
grill, turn the selector knob to the position 
(grill),

D

u

ring

 

grilling,

 

do

 

not

 

set

 

the

 

thermostat

 

knob

 

to

over

 

200

 °

C

 

and

 

keep

 

the

 

oven

 

door

 

closed

.

Practical

 

cooking

 

advice

GRILL

• When using the GRILL cooking mode, place the

rack in position 4 and the dripping pan in position 1
to collect cooking residues (fat and/or grease).

• We recommend that the power level is set to

maximum. The top heating element is regulated by

Summary of Contents for KP9508CXG













Reviews: