2
GB
Before operating your new appliance please read
this instruction booklet carefully. It contains
important information concerning the safe installation
and operation of the appliance.
Please keep these operating instructions for future
reference. Make sure that the instructions are kept
with the appliance if it is sold, given away or moved.
The appliance must be installed by a qualified
professional according to the instructions provided.
Any necessary adjustment or maintenance must be
performed after the appliance has been
disconnected from the electricity supply.
Positioning and levelling
It is possible to install the appliance alongside
cupboards whose height does not exceed that of the
hob surface.
! T
his
cooker
should
be
installed
directl
y
on
the
floor
.
Do
not
install
this
cooker
on
an
artificial
base
of
an
y
kind
.
Make sure that the wall in contact with the back of
the appliance is made from a non-flammable, heat-
resistant material (T 90°C).
! Important: Do not install this appliance adjacent
to the door or other means of access to minimise
the likelihood of persons using the door making
contact with pans on the hob surface.
To install the appliance correctly:
Place it in the kitchen, dining room or the bed-sit
(not in the bathroom).
If the top of the hob is higher than the cupboards,
the appliance must be installed at least 200 mm
away from them.
If the cooker is installed underneath a wall cabinet,
there must be a
minimum distance of 420
mm between this cabinet
and the top of the hob.
This distance should be
increased to 700 mm if
the wall cabinets are
flammable (
IAA BECKHA
).
Do not position
blinds behind the cooker
or less than 200 mm away from its sides.
Any hoods must be installed according to the
instructions listed in the relevant operating manual.
The cooker is fitted
with a safety chain that
must be attached to a
screw, secured to the
wall behind the
appliance.
! In order to prevent
accidental tipping of
the appliance, for
example by a child climbing onto the top oven door,
the supplied safety chain must be installed. Ensure
the chain is secured to the rear wall of the oven as
shown, and attach the chain to screw secured to the
wall behind the appliance.
L
evelling
If it is necessary to level the
appliance, screw the
adjustable feet* into the places
provided on each corner of the
base of the cooker (
IAABECKHA
).
The legs* provided with the
appliance fit into the slots on
the underside of the base of
the cooker.
E
lectrical connection
Electric cookers come without a power supply cable.
The cooker is designed to operate on an electricity
supply which conforms to the electrical data shown
on the Rating Plate. The cooker can be connected to
the mains only after removing the back panel of the
cooker itself with a screwdriver.
!
The following installation procedure must be
carried out by a qualified electrician. The electrical
installation must comply with the IEE Regulations,
Building & local By-Lays.
For the installation of the feeding cable carry out the
following operations:
HOOD
420
Min.
min.
650
mm. with hood
min.
700
mm. without hood
mm.
600
Min.
mm.
420
Min.
mm.
I
nstallation
*
Only
available
in
certain
models.
