10
The cooker with gas oven
A Tray for Catching Overflows
B Gas Burner
C Flame Failure Device for Cooktop Burners (only a
few models)
D Top Grate
E Control Panel
F Adjustable Feet or Legs
G Dripping Pan or Baking Sheet
H Electronic Lighting Device (only a few models)
K Oven Rack
L Electronic Lighting for Hob Burners (only on certain
models)
M Oven and Grill Control Knob
N Control Knobs for Gas Burners on Hob
O Button for Oven Light (only a few models)
P Timer Knob (only a few models)
The different functions and uses of the oven
The various functions included in the cooker are selected by
operating the control devices located on the cooker control panel.
Control Knobs for the Gas Burners on the Hob (N)
The position of the gas burner controlled by each one of the
knobs is shown by a symbol of a solid ring:
•
. To light one of the
burners, hold a lighted match or lighter near the burner. Press
down and turn the corresponding knob in the counter-clockwise
direction to the maximum setting. Each burner can be oper-
ated at its maximum, minimum or intermediate power. Shown
on the knob are the different symbols for off
•
(the knob is on this
setting when the symbol lines up with the reference mark on the
control panel), for maximum and minimum .
To obtain these settings, turn the knob counter-clockwise with
respect to the off position. To turn off the burner, turn the knob
clockwise until it stops (corresponding again with the
•
symbol).
Electronic Ignition for the Gas Hob
Some of the models are provided with instant electronic lighting
of the hob gas burners; these models are identified by the pres-
ence of a lighting device (see detail H). This device operates
when a slight pressure is applied to the “L”
button marked with
symbol. To light a specific burner just press the button la-
belled “L” while pushing the corresponding knob all the way in
and turning it counter-clockwise until it lights. For immediate
lighting, first press the button and then turn the knob.
Important:
Should the burner flames accidentally go out,
turn off the control knob and wait at least 1 minute before
trying to relight.
Models with Hob Gas Burner Safety Devices to Prevent
Leaks (only on certain models)
These models can be identified by the presence of the device
itself (see detail C).
Important: Since the hob burners are equipped with a safety
device, you must hold the control knob in for about 6 seconds
after the burner has been lighted to allow the gas to pass until
the safety thermocouple has heated.
Gas Cut Off (only on certain models)
This cooker has a safety cut out feature which switches
off the burners when you close the cover. This device is
provided as a safety feature in case the cover is lowered
with the burners on.
Attention: after the re-opening of the glass cover in order
to restore the gas cut-off, it is necessary to press manually
the push-button situated in the posterior part to right of
M
N
L
P
O
F
A
E
K
G
D
B
H
C
