10
GB
Care and maintenance
Cutting off the water and electricity
supplies
w8YVRSJJXLI[EXIVXETEJXIVIZIV][EWLG]GPI8LMW[MPP
limit wear on the hydraulic system inside the washing
machine and help to prevent leaks.
w9RTPYKXLI[EWLMRKQEGLMRI[LIRGPIERMRKMXERHHYVMRK
all maintenance work.
Cleaning the washing machine
The outer parts and rubber components of the appliance
can be cleaned using a soft cloth soaked in lukewarm
soapy water. Do not use solvents or abrasives.
Cleaning the detergent dispenser drawer
Remove the dispenser by
raising it and pulling it out
(
see figure
).
Wash it under running wa-
ter; this operation should be
repeated frequently.
Caring for the door and drum of your
appliance
w%P[E]WPIEZIXLITSVXLSPIHSSVENEVMRSVHIVXSTVIZIRX
unpleasant odours from forming.
Cleaning the pump
The washing machine is fitted with a self-cleaning pump
which does not require any maintenance. Sometimes, small
items (such as coins or buttons) may fall into the pre-cham-
ber which protects the pump, situated in its bottom part.
!
Make sure the wash cycle has finished and unplug the
appliance.
To access the pre-chamber:
1. using a screwdriver,
remove the cover panel
on the lower front part of
the washing machine (
see
figure
)
;
2. unscrew the lid by rota-
ting it anti-clockwise (
see
figure
)
:
a little water may
trickle out. This is perfectly
normal;
3. clean the inside thoroughly;
4. screw the lid back on;
5. reposition the panel, making sure the hooks are securely
in place before you push it onto the appliance.
Checking the water inlet hose
Check the inlet hose at least once a year. If there are any
cracks, it should be replaced immediately: during the wash
cycles, water pressure is very strong and a cracked hose
could easily split open.
!
Never use second-hand hoses.