GB
21
Setting the temperature
Turn the TEMPERATURE knob to set the wash temperature (see
Table of wash cycles
).
The temperature may be lowered, or even set to a cold wash .
The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value
set for each wash cycle.
!
Exception: if the
2
programme is selected, the temperature can be increased up to a value of 90°C.
Setting the spin speed
Turn the SPIN SPEED knob to set the spin speed for the selected wash cycle.
The maximum spin speeds available for each wash cycle are as follows:
Wash cycles
Maximum spin speed
Cottons
1000 rpm
Synthetics
800 rpm
Wool
800 rpm
Silk
drain only
The spin speed may be lowered, or the spin cycle can be excluded altogether by selecting the symbol
.
The washing machine will automatically prevent you from selecting a spin speed which is higher than the maximum speed
set for each wash cycle.
Functions
The various wash functions available with this washing machine will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the
selected wash cycle.
Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of lightly soiled
cotton and synthetic fabrics (refer to the
“Table of wash cycles”
). “
” enables you to wash in less time thereby saving
water and electricity. We suggest using a liquid detergent suitably measured out to the load quantity.
!
This function may not be used in conjunction with wash cycles 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, ,
.
The
function saves energy by not heating the water used to wash your laundry - an advantage both to the
environment and to your energy bill. Instead, intensified wash action and water optimisation ensure great wash results in the
same average time of a standard cycle.
For the best washing results we recommend the usage of a liquid detergent.
!
This function may not be used in conjunction with wash cycles 1, 6, 7, 8, 9, 10, 12, 13, 14, ,
.
Easy iron
By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end
of the cycle the washing machine will perform slow rotations of the drum; the indicator lights for the EASY IRON and START/
PAUSE options will flash (the first one green, the second orange). To end the cycle, press the START/PAUSE button or the
EASY IRON button. For the
9
wash cycle, the machine will end the cycle while the laundry is soaking and the EASY IRON
and START/PAUSE indicator lights will flash. To drain the water so that the laundry may be removed, press the START/
PAUSE button or the EASY IRON button..
!
This function may not be used in conjunction with wash cycles 8, 10, 12, 13, 14, ,
.
Delay timer
This timer delays the start time of the wash cycle by up to 12 hours.
Press the button repeatedly until the indicator light corresponding to the desired delay time switches on. The fifth time the button
is pressed, the function will be disabled.
N.B.
Once the START/PAUSE button has been pressed, the delay time can only be modified by decreasing it until launching
the set programme.
!
This option is enabled with all programmes.
Personalisation