manualshive.com logo in svg

Indesit IDCL 85 B H, Instruction Manual

Share
Download
Indesit IDCL 85 B H Instruction Manual Download Page 9

GB

9

Programme selection knob 

Allows for setting the programme: turn until the indicator points towards the desired programme.

 The OFF position switches off the 

dryer. 

(see Starting and selecting a programme).

Options buttons

Allow for selecting the options available for the selected programme. The relative indicator lights turn on when the option has been 
selected 

(see Programmes and options).

START/PAUSE button and indicator light 

When the green light flashes slowly, press the button to start the programme. When the cycle is under way, the indicator light remains 
on. To put the programme into pause mode, press the button again; the indicator light will turn orange and start flashing again.
To resume the programme from the point it was interrupted, press the button again

 (see Start and programme selection).

Indicator lights

“Maintenance” indicator lights

The indicator lights provide important information. They indicate the following:

Before each programme, the indicators light 

  CLEAN FILTER  and 

  EMPTY WATER signals that it is essential to clean the filter 

and the water container must be emptied, before using the tumble dryer 

(see Care and maintenance).

If the water container fills during the course of the programme, the LED lights up. The water container must be emptied before pressing 
the START/PAUSE button to resume the cycle from the point it was interrupted. 

The “Clean condenser unit” indicator light 

 (CLEAN CONDENSER) signals that it is essential to clean the condenser regularly 

(see 

Care and maintenance).

“Drying phases” indicator lights

The 

 

DRYING

 indicator light signals that the drying phase is running.

The 

  

COOL TUMBLE 

indicator light signals th

at the cooling phase is running.

The 

END 

indicator light signals that the programme has ended.

“Delay timer” indicator light

If the ”Delay timer” option has been activated

 

(

see “Programmes and options”

), after the programme has started, the indicator light 

corresponding to the chosen delay time will start flashing:

As time passes, the remaining delay will be displayed and the corresponding indicator light will flash:

Once the set delay time ends, the flashing LED will turn off and the set programme will start.

Summary of Contents for IDCL 85 B H

















Reviews:

No comments

Brands by name

Popular brands

Load more brands