Indesit IDCE H G45 B Instruction Manual Download Page 29

EN

29

Warnings  

and suggestions

!

 This appliance has been designed and built according to 

international safety standards. These warnings are given for 

safety reasons and must be followed carefully.

General safety

•  This tumble dryer is not intended for use by persons 

(including children) with reduced physical, sensory or 

mental capabilities , or lack of experience and knowledge, 

unless they have been given supervision or instruction 

concerning use of the appliance by a person responsible 

for there safety. 

•  This tumble dryer has been designed for home, and not 

professional, use.

•  Do not touch the appliance while barefoot or with wet 

hands or feet.

•  Unplug the machine by pulling on the plug, not the cord.
•  Children must not be in proximity of the dryer when in use. 

After using the dryer, turn it off and unplug it. Keep the door 

closed to make sure that children do not use it as a toy.

•  Children should be supervised to ensure that they do not 

play with the dryer.

•  The appliance must be installed correctly and have proper 

ventilation. The air intake at the front of the dryer should 

never  be obstructed 

(see Installation).

•  Never use the dryer on carpeting where the pile height 

would prevent air from entering the dryer from the base.

•  Check to see if the dryer is empty before loading it.
• 

The back of the dryer could become very hot. 

 

Never touch it while in use.

•  Do not use the dryer unless the filter, watercontainer and 

condenser are securely in place (see Maintenance).

•  Do not overload the dryer (see Laundry for maximum loads).
•  Do not load items that are dripping wet.
•  Carefully check all instructions on clothing labels (see 

Laundry).

•  Do not tumble dry large, very bulky items.
•  Do not tumble dry acrylic fibres at high temperatures.
•  Complete each programme with its Cool Tumble Phase.
•  Do not turn off the dryer when there are still warm items 

inside.

•  Clean the filter after each use (see Maintenance).
•  Empty the water container after each use (see Maintenance).
●•  Clean the condenser unit at regular intervals (see Maintenance).
●•  Do not allow lint to collect around the dryer.
•  Never climb on top of the dryer. It could result in damage.
•  Always follow electrical standards and requirements (see 

Installation).

•  Always buy original spare parts and accessories (see Service).

To minimise the risk of fire in your tumble dryer, the 

following should be observed:

•  Tumble dry items only if they have been washed with 

detergent and water, rinsed and been through the spin 

cycle. It is a fire hazard to dry items that HAVE NOT been 

washed with water.

●•  Do not dry garments that have been treated with chemical 

products.

•  Do not tumble dry items that have been spotted 

or soaked with vegetable or cooking oils, this 

constitutes a fire hazard. Oil-affected items can ignite 

spontaneously,especially when exposed to heat sources 

such as a tumble dryer. The items become warm, causing 

an oxidisation reaction with the oil, Oxidisation creates 

heat. If the heat cannot escape, items can become hot 

enough to catch fire. Piling, stacking or storing oil-effected 

items can prevent heat from escaping and so create a fire 

hazard.If it is unavoidable that fabrics containing vegetable 

or cooking oil or those that have been contaminated with 

hair care products be placed in a tumble dryer they should 

first be washed with extra detergent - this will reduce, but 

not eliminate the hazard. The cool tumble phase should be 

used to reduce the temperature of the items. They should 

not be removed from the dryer and piled or stacked while 

hot.

•  Do not tumble dry items that have previously been cleaned 

in or washed in, soaked in or soiled with petrol/gasoline, 

dry cleaning solvents or other flammable or explosive 

substances. Highly flammable substances commonly used 

in domestic environments including cooking oil, acetone, 

denatured alcohol, kerosene, spot removers, turpentine, 

waxes and wax removers. Ensure these items have been 

washed in hot water with an extra amount of detergent 

before being dried in the tumble dryer.

●•  Do not tumble dry items containing foam rubber (also 

known as latex foam), or similarly textured rubber like 

materials. Foam rubber materials can, when heated, 

produce fire by spontaneous combustion.

●•  Fabric softener or similar products should not be used in 

a tumble dryer to eliminate the effects of static electricity 

unless the practice is specifically recommended by the 

manufacturer of the fabric softener product.

•  Do not tumble dry undergarments that contain metal 

reinforcements eg. bras with metal reinforcing wires. 

Damage to the tumble dryer can result if the metal 

reinforcements come loose during drying.

●•  Do not tumble dry rubber, plastic articles such as shower 

caps or babies waterproof covers, polythene or paper.

•  Do not tumble dry rubber backed articles, clothes fitted 

with foam rubber pads, pillows, galoshes and rubber 

coated tennis shoes.

•  Remove all objects from pockets, especially lighters.

!

 WARNING: Never stop the dryer before the end of the 

drying cycle unless all items are quickly removed and 

spread out so that the heat is dissipated.

Save energy and respect the environment

•  Wring out all items to eliminate excess water before 

tumble drying (if you use a washing machine first, select  

a high spin cycle). Doing this will save time and energy 

during drying.

•  Always dry full loads - you save energy: single items or 

small loads take longer to dry.

•  Clean the filter after each use to contain energy 

consumption costs 

(see Maintenance)

Summary of Contents for IDCE H G45 B

































Reviews: