background image

6

GB

Care and maintenance 

Cutting off the water and electri-

city supplies

• Turn off the water tap after every wash cycle. 

This will limit wear on the hydraulic system 

inside the washer-dryer and help to prevent 

leaks.

• Unplug the washer-dryer when cleaning it 

and during all maintenance work.

Cleaning the washer-dryer

• The outer parts and rubber components 

of the appliance can be cleaned using a soft 

cloth soaked in lukewarm soapy water. Do not 

use solvents or abrasives.

• The washer-dryer has a “Auto Clean” program-

me for its internal parts that 

must be run with 

no load in the drum

.

For  maximum  performance  you  may  want  to 

use either the detergent (i.e. a quantity 10% the 

quantity  specified  for  lightly-soiled  garments) 

or special additives to clean the washer-dryer. 

We recommend running a cleaning programme 

every 40 wash cycles.

To start the programme press buttons 

A

 and 

B

 

simultaneously for 5 seconds 

(see figure).

The programme will start automatically and will 

last approximately 70 minutes. 

Cleaning the detergent dispenser 

drawer

Remove the dispenser 

by raising it and pul-

ling it out (

see figure

).

Wash it under running 

water; this operation 

should be repeated 

frequently.

Caring for the door and drum of 

your appliance

• Always leave the porthole door ajar in order 

to prevent unpleasant odours from forming.

Cleaning the pump

The washer-dryer is fitted with a self-cleaning 

pump which does not require any maintenan-

ce. Sometimes, small items (such as coins or 

buttons) may fall into the pre-chamber which 

protects the pump, situated in its bottom part.

 

!

  Make sure the wash cycle has finished and 

unplug the appliance.

To access the pre-chamber:

1. using a screwdri-

ver, remove the 

cover panel on the 

lower front part of the 

washer-dryer (

see 

figure

)

;

2. unscrew the lid 

by rotating it anti-

clockwise (

see

 

figu-

re

)

a little water may 

trickle out. This is 

perfectly normal;

3. clean the inside thoroughly;

4. screw the lid back on;

5. reposition the panel, making sure the hooks 

are securely in place before you push it onto 

the appliance.

Checking the water inlet hose

Check the inlet hose at least once a year. If 

there are any cracks, it should be replaced 

immediately: during the wash cycles, water 

pressure is very strong and a cracked hose 

could easily split open.

!

 Never use second-hand hoses.

A

B

Summary of Contents for EWDE 7145

















Reviews: