EN
5
DAILY USE
1. CHECK WATER CONNECTION
Check that the dishwasher is connected to the water supply and
that the tap is open.
2. SWITCH ON THE DISHWASHER
Open the door and press the
ON/OFF
button.
3. LOAD THE RACKS
(see LOADING THE RACKS)
4. FILLING THE DETERGENT DISPENSER
5. CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE
Select the most appropriate program in accordance with the type
of crockery and its soiling level
(see PROGRAMS DESCRIPTION)
by
pressing the
P
button.
6. START
Start the wash cycle by pressing
START/Pause
button (led is lit)
and closing the door within 4 sec. When the program starts you
hear a single beep. If the door was not closed within 4sec., the
alarm sound will be played. In this case, open the door, press
START/Pause
button and close the door again within 4 sec.
7. END OF WASH CYCLE
The end of the wash cycle is indicated by beeps and by the flashing
of the indicator light of the selected program. Open the door and
switch off the appliance by pressing the
ON/OFF
button.
Wait for a few minutes before removing the crockery - to avoid
burns. Unload the racks, beginning with the lower one.
The machine will switch off automatically during certain extended
periods of inactivity, in order to minimise electricity consumption.
If the crockery is only lightly soiled or if it has been rinsed with
water before being placed in the dishwasher, reduce the amount
of detergent used accordingly.
MODIFYING A RUNNING PROGRAM
If a wrong program was selected, it is possible to change it, provided
that it has only just begun: open the door, press and hold the
ON/OFF
button, the machine will switch off.
Switch the machine back on using the
ON/OFF
button and select
the new wash cycle and any desired options; Start the wash cycle by
pressing
START/Pause
button and closing the door within 4 sec.
ADDING EXTRA CROCKERY
Without switching off the machine, open the door (
START/Pause
led starts blinking) (
be ware of HOT steam!
) and place the crockery
inside the dishwasher. Press the
START/Pause
button and close the
door within 4 sec., the cycle will resume from the point at which it was
interrupted.
ACCIDENTAL INTERRUPTIONS
If the door is opened during the wash cycle, or if there is a power cut,
the cycle stops. Press the
START/Pause
button and close the door
within 4 sec., the cycle will resume from the point at which it was
interrupted.
ADVICE AND TIPS
TIPS
Before loading the baskets, remove all food residues from the crockery
and empty the glasses.
You do not need to rinse beforehand under
running water.
Arrange the crockery so that it is held in place firmly and does not tip
over; and arrange the containers with the openings facing down-
wards and the concave/convex parts placed obliquely, thus allowing
the water to reach every surface and flow freely.
Warning:
lids, handles, trays and frying pans do not prevent the
sprayer arms from rotating.
Place any small items in the cutlery basket.
Very soiled dishes and pans should be placed in the lower basket be-
cause in this sector the water sprays are stronger and allow a higher
washing performance.
After loading the appliance, make sure that the sprayer arms can
rotate freely.
UNSUITABLE CROCKERY
•
Wooden crockery and cutlery.
•
Delicate decorated glasses, artistic handicraft and antique crockery.
Their decorations are not resistant.
•
Parts in synthetic material which do not withstand high temperatures.
•
Copper and tin crockery.
•
Crockery soiled with ash, wax, lubricating grease or ink.
The colours of glass decorations and aluminium/silver pieces can
change and fade during the washing process. Some types of glass
(e.g. crystal objects) can become opaque after a number of wash
cycles too.
DAMAGE TO GLASS AND CROCKERY
•
Only use glasses and porcelain guaranteed by the manufacturer as
dishwasher safe.
•
Use a delicate detergent suitable for crockery
•
Collect glasses and cutlery from the dishwasher as soon as the
wash cycle is over.
TIPS ON ENERGY SAVING
•
When the household dishwasher is used according to the manufac-
turer’s instructions,
washing tableware in a dishwasher usually
consumes less energy and water than hand dishwashing.
•
In order to maximize dishwasher efficiency it is recommended to
initiate the wash cycle once dishwasher is fully loaded
. Loading
the household dishwasher up to the capacity indicated by the man-
ufacturer will contribute to energy and water savings. Information
on correct loading of tableware can be found in Loading chapter.
In case of partial loading it is recommended to use dedicated wash
options if available (Half load/ Zone Wash, Multizone), fiilling up only
selected racks. Incorrect loading or overloading the dishwasher may
increase resources usage (such as water, energy and time, as well as
increase noise level), reducing cleaning and drying performance.
•
Manual pre-rinsing of tableware items leads to increased water and
energy consumption and is not recommended.
HYGIENE
To avoid odour and sediment which can be accumulated in the
dishwasher
please run a high temperature program at least one a
month
. Use a tea spoon of detergent and run it without the loading
to clean your appliance.
