Indesit DFP 58M94 Operating Instructions Manual Download Page 16

Page: 16 / 16

Indesit Company Spa

Viale Aristide Merloni 47

60044 Fabriano (AN)

Italy

Assistance

Before contacting Assistance:

• Check whether the problem can be resolved using the Troubleshooting guide

• Restart the programme to check whether the problem has ceased to exist.

• If the problem persists, contact the Authorised Technical Assistance Service.

Never use the services of unauthorised technicians.

Please have the following information to hand:

• The type of malfunction.

• The appliance model (Mod.).

• The serial number (S/N).

This information can be found on the appliance data plate

Assistance

195128922.02 - NC

02/2015 pb - Xerox Fabriano

INDESIT SERVICE

In the unlikely event that your product fails to

work normally, contact (in Australia) our

service team on:

Phone: (02) 8858 6493

or visit www.indesit.net.au/service-enquiries

INDESIT SPARE PARTS

A wide range of genuine accessories are

available for your appliance.

For more information (Australia Only):

Phone: (02) 9714 3434

AUSTRALIA SALES

BUSH AUSTRALIA PTY LTD

46-48 Buffalo Road, Gladesville NSW 2111

Phone: (02) 9714 3434

www.indesit.net.au

Summary of Contents for DFP 58M94

















Search results

Summary of Contents for DFP 58M94

Reviews:

Related manuals for DFP 58M94

Brands by name

Popular brands

Indesit DFP 58M94, Operating Instructions Manual

Search results

Summary of Contents for DFP 58M94

Reviews:

Related manuals for DFP 58M94

Brands by name

Popular brands