MMP-1: INSTALLATION & OPERATION MANUAL
PAGE 10
SPECIFICATIONS
Product Mounting
Compatible with Clipsal 2000 series mounting accessories
AC Power Supply to PoE
AC 100-240V 50/60Hz
MMP-1 Power Supply DC
PoE 24VDC 1.0A
BT Revision
BT 4.2
BT Range
20 metres
USB Flash Drive
Flash drive capacity MAX 128GB / FAT32 partition
USB Player
MP3: Stereo files @ 128k, 192k, 320k and VBR bit rates
Front panel line input
TRS 3.5mm unbalanced jack (0.3v level, impedance 10K, internal mono
sum)
Rear panel line input
JST3 balanced (0.5v level, impedance 10K, mono input)
Rear Panel line output
JST3 balanced (0.5v level, impedance 600ohms, mono output)
PoE line output
RJ45 balanced (0.5v level, impedance 600ohms, mono output)
Product Dimensions HxWxD
76 x 118 x 32 mm (Clipsal 2000 series style mounting)
Product Weight
100 grams
Shipping Dimensions HxWxD
255x200x70 mm
Shipping Weight
660 grams
Included Accessories
PoE power supply , Line in and out cable, RJ45 line cable
* Disclaimer:
Instructions and specifications are correct at time of printing.
Information within may be subject to change without notice.
inLINK Connection
The MMP-1 may be connected directly into any inDESIGN product that features an inLINK port. For specific
installation and user instructions please view the user manual for the specific device you wish to connect the
MMP-1 to.
1. RJ45 to RJ45 shielded connectors. Use CAT6A network cable. Max length 100m
2. inDESIGN InLINK Port
*Note: in this configuration the balanced line output on the rear of the MMP-1 should not be used.
1
2
Summary of Contents for MMP-1
Page 1: ......