BA SERIES: INSTALLATION & OPERATION MANUAL
PAGE 2
The inDESIGN BA Series Power Amplifiers are high quality
amplifiers for commercial and installed audio applications.
The BA Series Power Amplifiers provide either 4 Ohm or 100V
speaker outputs.
The amplifiers are part of inDESIGN’s Install Series, which also
includes mixers and power amplifiers. These units provide
excellent features and value.
INTRODUCTION
INTRODUCTION
2
IMPORTANT SAFETY
INSTRUCTIONS
3
INSTALLATION
5
FRONT PANEL
6
REAR PANEL
7
BLOCK DIAGRAM
8
SPECIFICATIONS
9
CONTENTS
Electrical and Safety Warnings
THESE SERVICE INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY.
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING
OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS
UNLESS YOU ARE QUALIFIED TO DO SO.
CAUTION
The lightening flash with arrowhead
symbol, with an equilateral triangle,
is intended to alert the user to the
presence of un-insulated
“dangerous voltage” within the products
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
AVERTISSEMENT: POUR ÈVITER
LE RISQUE D´INCENDIE OU DE CHOCS
ÈLECTRIQUES, NE PAS EXPOSER CET APPAREIL À
LA PLUIE OU À L´HUMIDITÈ
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
