1
Independent Technology Service Inc.
9182 Independence Ave. Chatsworth, California 91311
Toll Free: 1.800.342.3475
BRUSH AMPLIFIER ADJUSTMENT
AMP-0006
AMP-0021
All amplifiers need adjustment after installation. The adjustment is basically the same for all DC
brush amplifiers. Above are the Glentek amplifiers, these instructions are the same for the AMC
amplifiers.
Safety Notice:
This equipment contains High Voltages; up to 240 DC Volts. Improper use can cause
serious or fatal injury. Only qualified personnel should attempt the installation and start-up procedure.
Disclaimer:
In no event shall ITS Inc. or any of our affiliates be liable for any damages whatsoever, and in
particular ITS Inc. or any of our affiliates shall not be liable for special, indirect, consequential, or incidental
damages, or damages for lost profits, loss of revenue, or loss of use arising out of use of this product, whether such
damages arise in contract, negligence, tort, under statute, in equity, at law, or otherwise.
Publication No. D-9812-BRUSH AMP v1.5
February 2012
