Indel GIN-SAC4 Series, Hardware User Manual, Page: 82 / 94

SAC4xX User Manual
01.04.2020 Rev 1.42en 82
No. Type Description Possible causes
7.4
Fault The signal strength of the resolver
or SinCos is outside the Sin
2 Cos 2
Min
and Sin 2 Cos 2
Max
range

Cable interruption of the feedback

Soiled SinCos scale

Distance between sensor and scale
is too big or too small
No. Type Description Possible causes
8.4
OK Axis is activated and controls
No. Type Description Possible causes
9.2
Warning Motor temperature is higher than
the configured temperature warn-
ing

Motor too hot
9.3
Fault Motor temperature is higher than
the configured maximum tempera-
ture

Motor too hot
9.4
Fault Overcurrent or short circuit

Motor overloaded (too much load)

Short circuit in the motor or wiring

Output stage defective