Indel B TB118 DD Steel, Instructions For Use Manual

Page: 26 / 108

24
TB STEEL DOUBLE DOOR
TB STEEL DOUBLE DOOR_24-01-2019
STARTING AND OPERATING
DC CONNECTION
The unit is equipped with an electronic control system that will prevent polarity reversal. In the event that the
battery connection is reversed the unit will not start or operate.
The power inlet socket is fitted with a 15A fuse for protection.
Plug the 12/24V connection cable into the DC voltage socket on the rear and then connect to the cigarette
lighter or a suitable 12V or 24V power source.
AC CONNECTION
The unit is equipped with a multi-voltage power supply
with priority circuit for connecting to an AC voltage
source of 100–240V. The power supply automatically
switches to mains operation, if the device is connected
to a 100–240V AC mains, even if the 12/24V connection
cable is still attached.
The power inlet socket is fitted with a 15A fuse for
protection.
Plug the 100–240V connection cable into the AC voltage
socket on the rear and then connect to a suitable 100–
240V AC voltage.
POWERING ON
Connect to the desired input voltage and press the
ON
OFF
button to turn the unit on, the display will show the
current internal cabinet temperature.
DC Power Cable
AC Power Cable
COOLING
LEFT BIN RIGHT BIN
BATTERY PROTECTION
HIGH
MID
LOW
SET
COMPRESSOR SPEED
MAX
MIN
SET
ON
OFF
COOLING