PSA-BT
Portable Lift Stand
-”Tote” Base-
FEatuRES:
•Accomdates containers up to 48” diameter.
•Constructed from heavy gauge plate and square tubing,
carbon steel - painted.
•Capacity to hold up to 150 lbs.
•Units supplied with two swivel casters, two rigid casters
and two with brakes.
•Air cylinder actuation - 48” travel. 10cfm @ 40 psi
required.
cautiON:
After the air line is installed and before operating
this machine for the first time, move the lift
control valve to the downward position. This will
“charge” the air cylinder and prevent surging
when the lift control valve is moved to the
upward position.
OpERatiON:
•Height adjusts with a 3-position air control valve. This
valve is spring centered and rests in the center “off”
position.
aSSEmbly
“tOtE”
baSE:
•Place up-right tube assembly onto the portable
base.
•Mount 1/2” x 12” up-right base to portable
base with 1/2” bolts, washer and nuts.
(4-pieces).
INDCO, Inc. •
M-M-30130 Lift Stand -Air manual • 2/5/13 • Page 5 of 6
up “raise” position
center “off” position
down “lower” position
3-position
air control
valve
mixer mount
max. 104”
min. 56”
(assembled)
4”
7.75”
18”
extention
(4) casters
50”
inside
width
32”
102.25”
overall height
(assembled)
mixer
mount plate
& slide-tube
air
cylinder
3-position
control
valve
(2) 3.5”
bolts
(2) 1.5”
bolts
12” x 12”
baseplate
