background image

INDCO, Inc.

M-M-30118 mixer manual HS-5

date: 3/8/05

HS-5 SERIES

DISPERSER

Contents

        Page

Safety, General & Installation

.

.

.

 

3

Operation

.

.

.

.

.

.

 

4

Maintenance .

.

.

.

.

.

 

5

Electric Motor Data & Troubleshooting .

.

 6

Parts List

.

.

.

.

.

.

10

HS-5

Series

Disperser

OWNERS

MANUAL

INDCO, Inc.

4040 Earnings Way

New Albany,  IN  4715

phone:

 

812-941-5954

 

fax:

 

812-944-9742

 

web:

 

www.indco.com

Warranty

Our products are guaranteed against
defective materials and workmanship, we will
repair or replace such items as may prove
defective at our option.  Warranty period is
one year on items manufactured by INDCO.
On items not manufactured by INDCO, the
manufactures warranty applies.  All
component parts of our products are covered
by this warranty, except for normal wear items
such as belts or impellers.  We cannot be
responsible for damage or abuse to equipment
caused by improper installation or operation.
Warranties can also be voided by
unauthorized disassembly of equipment.  For
warranty repairs, equipment is returned to
INDCO at the customer’s expense; we will
repair and return to customer at our expense.
Under no circumstances will we allow labor
charges or other expense to repair defective
merchandise.  This warranty is exclusive and
is in lieu of all other warranties, whether
express or implied.  INDCO shall not be liable
for any other damages, whether
consequential, indirect, or incidental, arising
from the sale or use of its products.

page 1 of 11

Summary of Contents for HS-5 Series












Reviews: