Bracket Mount - Toggle Clamp Adjustment, Continued
8. Install 2nd piece of the bracket mount, follow instructions 1~6 to locate and secure. Note that the center of the
bracket mount has not yet been fastened and should look similar to the picture in FIG- D.
9. Secure the two halves together with the included hardware as shown. Note that the hardware should be located
utilizing the slotted portion of the bracket.
INDCO, Inc. • M-M-30105 mixer manual BT & BGF Series • 1/9/14 • Page 11 of 11
FIG. - D
SLOTTED PORTION OF BRACKET
LOCATE THEN TIGHTEN
