the base turns on.
4. Left/Right Audio Input Jacks – Plug the Dual RCA Cable to these Audio Input Jacks
in accordance with colour codes. Connect the other end of the Dual RCA Cable to the
audio output jacks of an audio source (TV or other audio equipment). Use the “Y”
adapter cable whenever necessary.
5. Power Input Jack – Connect the output plug of the Power Adapter to this Input
Jack.
6. Power Indicator Light – When this red light turns on, power is on and is supplied
to the headphones.
7. Volume Control Wheel - Turn this wheel to adjust volume of headphones.
8. Charge Prongs – when headphones are placed in the base, these Charge Prongs must
be connected to the Charge Socket, so that the headphones can be charged.
9. Power ON/OFF Switch - Turn this switch to the ON position to use the headphones
and to the OFF position when the headphones are not in use.
10. Battery Compartment – Slide to open the lid and insert 2 “AA” rechargeable
batteries into the compartment according to polarity marked inside. Then close the
lid.
OPERATION
A. Operation and Adjustment of Base
1. Turn on the audio source (TV or audio equipment) to which the base is connected.
2. Turn the Power ON/OFF (channel) switch to channel 1 or 2 (same as the channel
selected on the headphones).
B. Operation and Adjustment of Headphones
1. Make sure 2 “AA” rechargeable batteries have been inserted in the headphone
battery compartment and they are charged up.
2. Turn Power ON/OFF Switch to the On position and the Red Power Indicator Light
turns on.
3. Set the Channel 1/2 Switch to match the channel selected on the base.
4. Place headphones over ears and adjust the volume to desired level.
CARE
Keep the base and headphones dry.
DO NOT drop. Handle the headphones and base carefully.
DO NOT use or store the headphones and base in extreme temperatures.
Remove batteries when not in use for a long period of time.
DO NOT modify or tamper with any components inside headphones and/or base. Doing
so will void the warranty.
TROUBLE-SHOOTING
No Sound
•
Make sure the Power ON/OFF Switch on both headphones and base are in the ON position
The battery level of headphones may be running low. Recharge the headphones or replace
rechargeable batteries.
