When charging, Red LED keeps on, and off when headset is fully charged.
Micro USB charge port-for charge purpose
3.5mm audio jack for wired headphone use, you can connect headphone to any audio source (with 3.5mm
audio jack, like mobile phones, tablets, pc etc) as wired headphone.
Headset Charge:
Battery: Built-in rechargeable lithium battery, DC: 3.7V/200mAh
Charging power: Through computer USB OR DC5V port.
Charging time: For the first usage please put to charge at least 4 hours continuously, For subsequent Charging 2-3 hours is
sufficient for 5-6 hours of usage at average volume. When charging, Red LED keeps on, and off when headset is fully
charged. NEVER leave it to over-charge.
III.
Headset Pair
1
．
Pls put your cellphone within 1M away from your headset, the closer, the better.
2
．
Long press button till red/blue LED glitter in turn, then headset is in pairing.
3
．
Open the Bluetooth function on your cellphone, search the Bluetooth device, then confirm with password No. 0000
if necessary.
4
．
After your cellphone is paired with headset, headset will automatically enter into Standby Mode, with blue LED
glittering 2 times fastly by each 6 seconds.
Remark: The time limited for Bluetooth headset is normally 2-3 minutes, if the red/blue stop glittering in turn, the pairing is
finished; If you failed to pair, pls repeat the above steps.
IV.
Answer the Call and Stop the Call
When calling is coming, there will be indication sound in the headset, press the power button shortly, then you can answer
the call. Or you can use your cellphone to answer the call. Long press the button to refuse phone call.
When finished the call, pl press the power button shortly again to stop the call or you can use your cellphone to stop.
V.
Exchange the headset calling into Cellphone calling
You can press the power button for 3
seconds to change the call between headset and cellphone.
Choose music
When listen music from PC, press “ON/OFF” key quickly to pause , also press
”
and
“
Volume-
”
key quickly to
choose songs
Adjust volume:
Long Press
”
and
“
Volume-
”
to adjust the volume.
VI.
VOIP function for Mobile phone use
1. Under standby mode or music playing status, if you press “Power” button shortly, Mobile phone will enter into
VOIP mode; After stop VOIP, music will continue to play on your mobile phone.
2.
Re-call the last calling:
This headset can support last calling re-call, just press the power button for
2
seconds, then you can re-call the last
calling No.
VII.
Music listening
1.
When listening the music on mobile phone, if there is call in/out, the music will stop, and continue to play after
calling.
VIII.
Headset Sleeping function
After you disconnect the bluetooth connection between PC/Mobile phone and headset, the blue LED light will glitter
one time slowly by each 6S, you can directly re-connect the PC/Mobile phone with headset by clicking connection
