Incy Interiors Maxwell Cot Assembly Manual Download Page 4

 

Care & Maintenance 

 

When cleaning your cot, use a non-toxic, non-abrasive cleaner. Mix a solution of water with a 
small amount of a mild detergent. Apply to cot surface with a damp cloth. 

 

When moving the cot without castors assembled, always lifts the unit. Do not push or drag it 
to avoid damaging the base. 

 

It is important that the humidity levels in the room be controlled from extremes of too much 
humidity or too little. The cot should not be placed directly next to air-conditioning, outlets, 
fire places, radiators, space heaters, humidifiers, or dehumidifiers. Exposure to extreme 
variations of temperature and humidity can damage wood products. 

 

Keep the cot out of direct sunlight. UV rays may fade colours and in some cases darken them. 
It can cause crazing or hair line cracks in the finish. White finishes will darken naturally over 
time and exposure to direct sunlight will hasten this natural process along with some wood 
darkening; this is not considered to be a quality defect. 

 

If you need to put your cot in storage for any period of time do not store it in a damp or hot 
environment. Allow air flow around the furniture and do not stack anything on it. 

 
Check List 

 

Always check the cot is free from damage before use. Do not use product if any damage is 
present. 

 

Regularly check that all assembly fittings are always tightened properly and retighten as 
necessary. 

 

After Sales Customer Service 

When you receive your Incy Interiors product, if you need any assistance or if you have any 
comments with respect to any aspect of the goods, please contact your local distributor via email.  
 

If you are missing parts you can order parts by emailing us at [email protected] or call  
(02) 9412 3884. Please include the product name, colour, and a brief description of the part you are 
missing.  

You can also visit our website at 

www.incyinteriors.com.au 

for latest product information. 

 

Incy Interiors Pty Ltd 

81A Colville Street, Windradyne, NSW, 2795  

AUSTRALIA 

 (02) 9412 3884 

www.incyinteriors.com.au 

 

 

 

Summary of Contents for Maxwell Cot












Reviews: