Loony TIX
TM
6
|
P a g e
©2014 Incredible Technologies, Inc. All Rights Reserved. Non-IT trademarks are the properties of their owners and used for illustration only.
Unauthorized duplication or disclosure may violate applicable laws or agreements. Loony Tix~Install 11.21.14
Cabinet Setup
Mounting HDTV Monitor
Materials required:
(2)
HDTV Monitor Mounting Brackets
(2) 8-32 x 3/8” Hex Screws
(4) M8 Mounting Plate Bolts
(4) Mounting Plate Flat Washers
(4) Mounting Plate Lock Washers
11-32” Nut Driver or Phillips Head
Screwdriver
It is critical to use extreme caution while mounting the HDTV to the cabinet. To prevent
injuries when moving or lifting, make sure to use at least two people.
Do
NOT
attempt to mount the HDTV Monitor before mounting the Marquee Topper.
Before mounting the HDTV Monitor to the cabinet you must attach the Mounting Brackets to
the HDTV Monitor.
Mounting HDTV Monitor Procedure
1
Using the four M8 Mounting Plate Bolts, attach the two Mounting Brackets to the
HDTV Monitor. See circles in image below for location of bolts.
2
Finish the bolts with the four Mounting Plate Flat Washers and four Mounting Plate
Lock Washers.
To Purchase This Item, Please Visit : BMIGaming.com | Call Global Sales : + 561.391.7200 | USA / CA : (800) 746-2255
