Incom ICW-1000G Global User Manual Download

Page: 4 / 57

■

Compliance Statement for FCC

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

Operation is subject to the following two conditions; (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help

For body worn operation, this phone has been tested and meets FCC RF exposure guidelines

when used with an accessory that contains no metal and that positions the handset a

minimum of 1.5cm from the body. Use of other accessories may not ensure compliance with

FCC RF exposure guidelines.

Summary of Contents for ICW-1000G Global


























































Search results

Summary of Contents for ICW-1000G Global

Reviews:

Related manuals for ICW-1000G Global

Brands by name

Popular brands

Incom ICW-1000G Global, User Manual

Search results

Summary of Contents for ICW-1000G Global

Reviews:

Related manuals for ICW-1000G Global

Brands by name

Popular brands