InCoax D2501
Copyright © 2021 InCoax Networks AB. All rights reserved.
Confidential under NDA
7
Specifications
The electrical, physical and functional specifications for the D2501 DPU. Please note that the specification may
be subject to change.
Performance
• Based on MoCA Access 2.5 Profile D. See reference
{c}
.
•
2.5 Gbps throughput on the MoCA port with 30dB SNR.
•
3.2 Gbps throughput on the MoCA port with 40dB SNR.
•
Max 31 Modems.
•
MoCA Bands: A - A, A - AH, A - AS, A - B, A - C, A - D and A - E
•
Frequency range: 400 to 1675 MHz
•
RF channel bandwidth: 100 MHz
•
Bonded operation supporting 3, 4, or 5 RF channels.
•
17
dBm maximum output power; automatically adjusted per modem.
•
Configurable beacon frequency.
•
Modulation: OFDM, QAM 8, 16, 32, 64, 128, 256, 512, or 1024; BPSK and QPSK
•
Multiplexing methods: TDMA/TDD
•
Communication: Half-duplex
Physical:
• Northbound fiber SFP+ port inside enclosure.
•
Multi Source Agreement (MSA) compliant, SerDes – 10 Gbps data rate, SFF-8472 (see
reference
{h}
) – Diagnostics interface.
•
Supporting XGS-PON, XG-PON, GPON, EPON and Active Ethernet.
•
Management Ethernet port inside enclosure: 10 / 100 / 1000 Mbps, configuration and
statistics port.
•
RJ-45 connector supports type CAT5 UTP (as a minimum).
•
One coax out with PG-11.
•
F-female connector - 3/8-UNEF32, 75
Ω
•
F-female connector - 3/8-
UNEF32, 75 Ω
for 13-25VDC power feed
Indicators
• Power on, Management, Trunk, Coax Link traffic and alerts.
• External led indication on ZTP and system initiation and status.
Dimensions
• 257 × 203 × 100 mm (W × H × D)
•
Wall mount
Weight
• 3 kg
Environmental
• Operating temperature: -30 °C to +70 °C
•
Relative humidity: 20 % to 80 %
•
Altitude: maximum 2000 m
•
Dynamic temperature control with cooling redundancy.
•
Abnormal operation conditions alarms
•
Storage (non-condensing): -40 °C to +70 °C and 5 % to 90 % relative humidity
•
RoHS and RoHS 2. See reference
{b}
•
UL 94 V-0. See reference
{i}
Power
• 100-240VAC, 50/60Hz
• 13-25VDC
•
Power consumption 12 W nominal.
•
Automatic power on after power grid failure.
a
InCoax recommends using the SFP+ module:
Fiber MM: Ubiquiti 10G UF-MM-10G
Fiber SM: InCoax 10G OS-SP96-3110D/ Ubiquiti 10G UF-SM-10G/ Ubiquiti Bi-Di UF-SM-10G-S/ Finisar FTLX1475D3BTL/
NorthLab NORT-1031-LRT/ FS 10GBASE-BX BiDi SFP+ 1330nm-TX/1270nm-RX 10km DOM Transceiver Module/
FS 10GBASE-BX BiDi SFP+ 1270nm-TX/1330nm-RX 10km DOM Transceiver Module
Copper: MikroTik 10G S+RJ10/ Ubiquiti 10G UDC-2
