Syncro_View_AUS_v2.0.docx
Page 10 of 12
The Syncro View repeater is now shown in the centre window pane.
Right click the Syncro View and select “edit settings” to give the Syncro View a panel name (location) and an
address on the serial bus. This address should be different for each Syncro View added and different to any other
I/O boards that may exist on the serial bus.
Once the configuration file has been loaded into the panel the panel will now expect to see a Syncro View at the
address allocated to it and will show a fault condition if the Syncro View is not fitted or is removed.