15
2.4 CONFIGURING WIRELESS DEVICES
In order to add wireless devices to the configuration, please do the following.
Other wireless devices (ors, sounders, etc.) are added from the same menu.
All wireless devices have their own sets of properties:
EK-WL8-EXP
The device has two LEDs to indicate the state of power supply
(expanders also have an indicator for wireless connection). If you
wish to turn them off, select the appropriate options in the
Connection status and Power supply fault parameters.
If you select External DC input in Secondary supply monitoring, the
power supply will be monitored via the DC input.
EK-WL8-TRH
The translator has mainly the same properties as the expander, however there’s one additional
parameter Channel number, which lets you choose the frequency channel with the lowest level
of noise and interference (sections 1.8, 1.14 and 2.3)
EK-WL8-O
If you choose the Increased option in
Initialisation security
, then you would need to enter a
password in order to initialise the device. Normally the Standard initialisation security is used.
Indication
section includes parameters allowing you to turn on/off LED indication in a normal
state, in alarm state or in case of supply fault (low battery).
Options in
Control circuits
enable or disable protocol events in case of low battery or
tampering.
2.
Right click on 1.1 WL8-TRH and
open Add menu
3.
Add a wireless smoke
detector WL8-O to the system
1.
Open the Configuration tab
