Spend a moment in getting the boat flat with the sides turned in a little (1).
Fold the kayak from the bow to expel all air (2 & 3) then
re-roll from the stern
to protect the
valves (4 - 7) and get the bundle smaller. Kneel on the bundle as you go. Secure the package
with the compression strap supplied (8).
A little time spent in learning how to roll your boat properly will be most worthwhile.
Most damage to inflatable boats occurs off the water when in the folded state. Folded corners
which are dragged on hard ground can be expected to hole. In particular be careful with the
folded package where the internal parts of the
valves
protrude against the boat material. Do not
lay such a bump down on, say, the deck of a moving truck.
REPAIRS:
A basic repair kit of boat material and adhesive is included with the boat.
The adhesive requires warm and dry working conditions for best results. Preparation of a
permanent repair is as follows:-
• Cut a patch to fit the repair leaving 25mm (1") edge distance to the hole. Round corners
for appearance and resistance to lifting.
• Dry the surfaces and preferably clean with an M.E.K.(methyl ethyl ketone) solvent
damped cloth.
• Position the patch and mark the outline on to the boat with a pencil.
• Brush glue on to both surfaces. Do not over brush as the glue will drag and become
lumpy. Allow to dry 15 - 30 minutes, more in cool conditions.
• Place the patch and heat - warm to the touch - if necessary using a hair dryer or hot-air
gun. Heat activates the glue, providing an instant and permanent bond. Apply pressure
to the patch while warm. A portable camp cooker is a useful warming tool for on-trip
repairs (under a sheet in adverse conditions) -
but do not overheat
.
Temporary repairs can be made without heat or solvent if the patch is applied before one of
the glued surfaces is dry, i.e. while still slightly tacky.
WARRANTY
INCEPT’s
K series
inflatable kayaks in non-commercial use are guaranteed for a period of
five years from the date of purchase. Any manufacturing defects in materials or workmanship
found during the warranty period will be made good by Incept Marine Ltd at no cost,
provided only that the boat is returned to the nearest Incept repair station, freight paid. Call
the dealer from whom you purchased the boat, or Incept, for details.
