16
Figure 4-3
2.
Enter VUH Local IP, Subnet Mask and Gateway.
3.
Click OK.
Now device interface shows
at the upper right corner which means wired connection
is successful.
Note:
You also can enable DHCP to auto gain VUH IP, subnet mask and gateway and click
OK to complete wired connection.
Step 5. Click Production to config VUH room no.
Warning:
VUH room no. must match VUH short no. on WEB of corresponding VUO.
If you want to set this VUH to be master VUH, then you shall select
Master. Fill in room no., click OK to save, see Figure 4-4.
Figure 4-4
If you want to set this VUH to be extension VUH, then you shall select Extension.
1.
Fill in user cinfig info for extension to auto sync with master, such as room
no. and master IP. See Figure 4-5.
Note:
Some extension config will auto sync with master VUH info, and cannot be
modified.
