6
Parameter
Note
DST Enable
Check “DST Enable” box, to enable DST.
If you locate in place using DST, you can set DST accordingly. You can
select week mode or date mode to start and end DST.
DST Type
Start Time
End Time
NTP Enable
Check “NTP Enable” box, to enable NTP server time sync function.
You can enter IP, zone, port no. and interval of PC where you installed NTP
server to set NTP.
NTP Server
Zone
Port No.
NTP
Update
Period
Default
Click “Default”, to restore default settings in this tab.
Refresh
Click “Refresh” to refresh this page.
Chart 5-3
5.2.1.6 Config Manager
Go to System Config>Local Config>Config Manager, see Figure 5-7.
You can import and export configuration, or restore default setup.
Figure 5-7
Parameter
Note
Backup
Check “card no.”, “VUH info”, and click
，
so you can back up
card no. and VUH info.
Restore Backup
Restore backup card info or VUH info.
During usage, if villa VUO is restored to default or card info is
abnormal, you can check Card Info box and click Restore Backup
to restore card info.
During usage, if you miss-modify VUH info, you can check VUH
info box and click Restore Backup to restore VUH info.
Warning:
Every half an hour, VUO auto saves card no. and VUH info in the