APPLICABLE IN VARIOUS DRY INTERIOR SPACES
APPLICATION METHOD (APPLICATION WITH ADHESIVE)
First, check the bed surface for
flatness. If it is not flat, repair with putty
or other suitable material (when the
bed is gyp-sum board). Gypsum board
(t
≥
9.5mm) or calcium silicate board is
recommended for the bed.
Apply the specified adhesive
(SUPER-ECONUR) to the bed in a
combed pattern.
Press the ECOCARAT uniformly into
the bed. ECOCARAT does not require
joints. (When the bed is mortar, keep a
0.5 to 1mm joint).
Check the condition of the finish for
stains, chips, etc. Stains from hands
can be removed with an eraser. See
page 51 for maintenance methods.
1.
Checking the bed
2.
Applying the
adhesive
3.
Applying ECOCARAT
4.
Inspecting the
finish
Suitable for installation in locations not exposed to water.
Please do not install in locations exposed to water.
Living room
Outdoors
×
Bathroom
(Walls exposed to water)
×
Flooring
×
Kitchen backsplash
×
RECOMMENDATION
CAUTION
Bedroom
Hallway
31
Summary of Contents for ECOCARAT+
Page 1: ......
Page 4: ...Start making a home from thinking about air...
Page 5: ......
Page 6: ...4...