Product name
USB 3.0 to SATA Adapter
Product type
Inateck UA1001
material
ABS plastic
Weight
15g
Supported drives interface
SATA III，II，I
Supported of drives
2.5” SSD/HDD
Hot plug，plug&play
supported
Licenses
CE，FCC
Measurements
72*30*13mm
Supported OS
Windows XP/ 7/8/10；Mac9.0 or above
How to use
a. Connect your hard drive to UA1001 properly
b. Connect UA1001 with computer by USB cable
c. Connect DC power adapter with UA1001
d. Power on, lower right comer of computer will have a
mobile hardware prompt after device recognized, file
manager will also have one.
Note:
• Before the removal of the data storage device, please
stop all data access and transfer to the device, so that the
storage can be normally removed. Forced removal may
lead to damage or loss of crucial data.
• Features automatic sleep and spin-down, goes into sleep
mode automatically after 30 minutes in idle state. LED
flashes each three seconds to indicate standby, a single
access to the drive restores the operational mode.
Product specifications
