How to install an iPad on KB02003
Please watch the below video for detailed installation and dismounting illustration:
https://www.inateck.com/kb02003
1. Take out protective case from keyboard as illustrated in the below picture. Hold the keyboard with left
hand and protective shell with right hand, and pull upward to detach the protective shell.
2. Place iPad and protective case on desk like photo below.
3. As is illustrated in the above photos, place B side of iPad inside A side of the protective shell, and then press
the rest three sides of iPad into the shell. Please pay attention that donʼt forcibly press the interface cut for
volume button.
Model: KB02003
FCC ID: 2AKHJ-HB235
Shenzhen Licheng Technology Co,.Ltd
A
B
Note: Please donʼt
forcibly press the
volume button interface
during installation.
Keyboard
Protective case
Reserved volume button
interface
