III. Specs
IV. Powering on/off
There is a power switch located on the side(#1 on the diagram) of
the speaker. Push the switch to turn it on & off.
V. Connecting the speaker
Wireless/Bluetooth
This speaker can connect wirelessly to devices that have Bluetooth.
Use the following steps:
1. Press the power switch for 6 seconds
2. The light on the front will be flashing white and red light
alternately, indicating that the speaker is in pairing mode
3. Go to your device’s Bluetooth connection screen and choose
“Inateck BTSP-20”
4. If you are asked for a password,type 0000
5. The blue light will stop flashing and your speaker will be
connected
6. When the speaker is paired and connected with PC, please
select it as the default playback device in the Windows Sound
settings.
*The method of connecting Bluetooth may vary with your device.
Please refer to your device’s manual or manufacturer if the above
steps do not work.
Wired
There is a 3.5mm port on the side (#5 on the diagram) of the
speaker which can be used to connect to another device by using
the included 3.5mm cable. If your device uses a port other than
3.5mm, then you will need an adaper cable.
Product Name
Product Model
Product Size
Charging Interface
Water-proof
AUX 3.5mm line input impedance
Input Sensitivity
Output Power
Battery built-in
System Support
Bluetooth Speaker
Inateck BTSP-20
85mm*85mm*45.5mm
Micro USB
IPX5 standard water-resistant
47kΩ
560MV
3W
3.7V 800mAh rechargeable battery built-in
WindowsXP/Vista/7/8; Mac; ios; Android
