Use the up/down direction arrows ( / ) to select a number and confirm with
the (OK) button. appears on the screen and the unit searches for a camera.
Use the left/right direction arrows ( / ) to select the menu item .
Use the up/down direction arrows ( / ) to select the time period after which
you wish the alarm to sound.
Use the left/right direction arrows ( / ) to select the menu item .
Use the up/down direction arrows ( / ) to select the lullaby of your choice
(1,2,3,4 or 5).
Use the left/right direction arrows ( / ) to select the menu item .
8
Lullabies
t
t
t
Alarm
t
.
t
t
Temperature unit
t
t
t
Add camera
t
t
t
t
t
Via the parent unit, you can activate one of five lullabies that will then be played over
the camera. To activate one of the lullabies, proceed as follows:
Confirm using the ( OK ) button.
You can set an alarm on the parent unit - this will sound on the parent unit after 2,4
or 6 hours, as you choose. To activate an alarm, proceed as follows:
Confirm using the ( OK ) button.
You can set the device to display the temperature in degrees Celsius (°C) or degrees
Fahrenheit (°F) .
Use the up/down direction arrows ( / ) to select the required unit of
temperature.
Confirm using the ( OK ) button.
You can connect one parent unit with up to four camera.
To add a camera to the parent unit, proceed as follows:
Use the left/right direction arrows ( / ) to select the menu item .
Use the up/down direction arrows ( / ) to select the menu item .
Confirm using the (OK) button. 1,2,3,4 appears on the screen.
Now hold down the PAIR button on the rear of the camera until an acoustic signal
is heard and the transmission image from the camera that has been added appears
on the screen.