Inalto IFLW7D40, User Manual

Page: 20 / 28

20
Troubleshooting
OPERATION IN CASE OF EMERGENCY
In the event of an emergency you should:
• Switch off all controls.
• Switch the appliance off at the power point or at the fuse box.
• Call the Residentia Support Team on 1300 11 HELP (4357).
Some minor faults can be fixed by referring to the instructions given in the Troubleshooting section
below. There is also a self-help section online at https://support.residentiagroup.com.au/
TROUBLESHOOTING
DESCRIPTION POSSIBLE CAUSE SOLUTION
Appliance does not
start
Door is not closed properly.
Clothes are stuck.
Close the door properly and restart.
Check the laundry.
Door can´t be opened Safety protection is activated. Disconnect the power and restart.
Water leakage Connections are not tight enough. Check and fasten the water inlet pipe.
Check and clean the outlet hose.
Detergent residues
in the detergent
dispenser
Detergent is damp and/or clotted. Clean and wipe the detergent
dispenser dry.
Indicator or display
does not work
PC board or harness have.
connection problems.
Switch off the power and check if the
mains plug is connected properly.
Abnormal noise Transport bolts still in place.
Floor is not solid or level.
Check if the transport bolts have been
removed.
Make sure the appliance is installed on
a solid and level floor.
ERROR CODES
DESCRIPTION POSSIBLE CAUSE SOLUTION
E30 Door is not closed properly. Close the door properly and restart.
E10 Water injecting problem during
wash cycle.
Check if the water pressure is high
enough.
Straighten the water pipe.
Clean the inlet valve filter.
E21 Overtime water draining. Check the drain hose for blockage.
E12 Water overflow. Restart the appliance.
EXX Others. Restart the appliance. If problem
persists, please contact the
customer service.