Inalto IDO6013T, User Manual

Page: 25 / 40

INALTO.HOUSE PAGE 25
cleaning
ReMOVing OVen PaRTS FOR
cleaning
•
The inner door glass panel can be
removed for cleaning but it must be
replaced the right way up. If there is
any writing on the glass, you must be
able to read it clearly when the cavity
doors are open.
• Always make sure that the glass is
pushed fully into the Stop position.
• To remove the glass panel, open the
door wide, push the clips on the left
and right sides of door bracket. Then
remove the plastic top cover. Hold the
glass and slide it out along the door
bracket.
1. PUSH
2. PULL OUT
Glass
To remove the door, open the door to
the maximum angle.Then pull the
buckle at the door hinge backward.
Close the door to an angle
approximately 30°. Hold the door with
one hand on each side.
Lift up and slowly pull the door out from
the oven.
•
30˚
22