6
Electrical Safety
• Voltage: Before connecting and turning on the appliance, ensure the electrical voltage and circuit
frequency correspond to that indicated on the appliance rating label.
• Earthing: This appliance should be properly earthed for your safety. The power cord of this appliance
is equipped with a three-prong plug for use in standard wall outlets to minimise the possibility of
electrical shock. Do not modify the cord and/or plug provided with the appliance. Improper use of the
earthed plug can result in the risk of electric shock.
• Connection: This appliance requires a standard 220-240 V AC 50Hz electrical outlet. Do not overload the
electrical circuit.
• Power cord: Do not kink or damage the power cord; do not leave it exposed or dangling. Secure it at the
back of the appliance so no one steps on or places anything on the cord or against it. Keep the cord out
of reach of children. When moving the appliance, make sure not to damage the power cord.
•
WARNING
When positioning the appliance, ensure the supply cord is not trapped or damaged.
• Auxiliary Items: Do not use an inverter, adaptor or extension cord with this appliance. If the cord is too
short, have a qualified electrician install an outlet near the appliance. Use of an extension cord and an
inverter can negatively affect the performance of the unit.
• Protect from moisture: To protect against the risk of electric shock, do not immerse the unit, cord or
plug in water or spray it with any other liquid. Do not connect or disconnect the electric plug when your
hands are wet. Turn the power switch off before removing the plug from the socket.
•
WARNING
Disconnect!
To reduce the risk of fire, electric shock or personal injury, always unplug
the appliance from the socket when not in use, when moving and before cleaning or servicing. Never
unplug the unit by pulling the power cord. Always grip the plug firmly and pull straight out from the
power point.
• Electrical work: Any electrical work required for the installation of this appliance should be carried out
by a qualified electrician.
Never use this appliance with a damaged refrigerant circuit! If the coolant circuit becomes damaged,
avoid proximity to open fires and all types of heat sources. The room in which the appliance is located
should be ventilated for a few minutes.
Installation
Heavy: This appliance is heavy, take care when moving it. To avoid back or other injury, consider a two
person lift or mechanical aid when installing it. Failure to do so can result in back or other injury.
Damage: When unpacking, check the appliance carefully for damage. If it is damaged, do not install
the appliance. Contact our after sales support centre on 1300 11 43 57 for advice on examination or return
of the damaged appliance.
Protect from moisture: Install the appliance in an indoor area protected from wind, rain,
water spray or drips.
Protect from heat: Do not install the appliance next to an oven, grill or other source of high heat, or where
it will be exposed to direct sunlight for prolonged periods of time.
Level: Install the appliance level in order to ensure proper operation.
WARNING
Ventilation: To ensure proper ventilation, keep any ventilation openings, in the appliance enclosure or
in the built-in structure, clear of obstructions. Ensure adequate air circulation around the appliance to
prevent overheating.
Safety Instructions (Cont.)