16
TOP-MOUNTING IN A CABINET
• Determine where in the top cabinet you want to install the rangehood,
then drill 4 holes of Ø4mm at the bottom of the hanging board of your cabinet (Figure 8).
Figure 8
• Install the rangehood onto the bottom of the cupboard and secure it in place
with four ST4×30mm screws (Figure 9).
• If there is a space between the wall and the rear of the rangehood, install the
rear-underside support mounting bracket using the two ST4×8mm screws.
WARNING:
Failure to install the screws or fixing device in accordance with these instructions
may result in electrical hazards!
Figure 9
Top-mounting in a cabinet
• Determine where in the top cabinet you want to install the rangehood, then drill 4 holes of Ø4mm at
the bottom of the hanging board of your cabinet (Fig.
).
Fig.
30.5mm
215mm
450mm
• Install the rangehood onto the bottom of the cupboard and secure it in place with four ST4x30mm
screws (Fig
).
• If there is a space between the wall and the rear of the rangehood, install the rear-underside support
mounting bracket (Part ID 2, Installation kit) using the two ST4x8mm screws.
WARNING: Failure to install the screws or fi xing device in accordance with these instructions may
result in electrical hazards!
Fig.
Top-mounting in a cabinet
• Determine where in the top cabinet you want to install the rangehood, then drill 4 holes of Ø4mm at
the bottom of the hanging board of your cabinet (Fig.
).
Fig.
30.5mm
215mm
450mm
• Install the rangehood onto the bottom of the cupboard and secure it in place with four ST4x30mm
screws (Fig
).
• If there is a space between the wall and the rear of the rangehood, install the rear-underside support
mounting bracket (Part ID 2, Installation kit) using the two ST4x8mm screws.
WARNING: Failure to install the screws or fi xing device in accordance with these instructions may
result in electrical hazards!
Fig.
Installation Instructions (Continued)
