User Manual
08
USER MANUAL
PAGE 08
INSTALLATION INSTRUCTIONS
LOCATING THE FI ING BRACKETS
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls
protruding from the hob.
Fix the hob on the work surface by screw four brackets on the bottom of hob (see picture) after installation.
Adjust the bracket position to suit for different work surface’s thickness.
The ceramic cooker hob must be installed by qualified personnel or technicians. We have professionals at
your service. Please never conduct the operation by yourself.
The ceramic cooker hob shall not be mounted to cooling equipment, dishwashers and rotary dryers.
The ceramic cooker hob shall be installed such that better heat radiation can be ensured to enhance its
reliability.
The wall and induced heating zone above the work surface shall withstand heat.
To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
A steam cleaner is not to be used.
This ceramic can be connected only to a supply with system impedance no more than 0.427 ohm. In case
necessary, please consult your supply authority for system impedance information.
►
►
►
►
►
►
►
CAUTIONS!
x