background image

User Manual

inalto.house

 18

 19

Tips for energy saving

 

Try not to open the door too often, especially when the weather is wet and hot. Once you 
open the door, close it as soon as possible.

 

Every now and then check if the appliance is sufficiently ventilated (adequate air circulation 
behind the appliance).

 

In normal temperature conditions, please arrange the thermostat at the middle setting.

 

Before loading the appliance with packages of fresh food, make sure they are cooled to 
ambient temperature.

 

Ice and frost layer increase energy consumption, so clean the appliance as soon as the layer 
is 3–5mm thick.

 

If it is the outer condenser, the rear wall should be always clean free of dust or any 
impurities.

 

The appliance should be located in the coolest area of the room, away from heat producing 
appliances or heating ducts, and out of the direct sunlight.

 

Let hot foods cool to room temperature before placing in the appliance. Overloading the 
appliance for ces the compressor to run longer. Foods that freeze too slowly may lose quality, 
or spoil.

 

Be sure to wrap foods properly, and wipe containers dry before placing them in the 
appliance. This cuts down on frost build up inside the appliance.

 

Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling 
Liners interfere with cold air circulation, making the appliance less efficient.

 

Organize and label food to reduce door openings and extended searches. Remove as many 
items as needed at one time, and close the door as soon as possible.

Disposal

Old units still have some residual value. An environmentally friendly method of disposal will ensure 
that valuable raw materials can be recovered and used again. The refrigerant u sed in your unit and 
insulation materials require special disposal procedures. Ensure that none of the pipes on the back 
of the unit are damaged prior to disposal. Up to date information concerning options of disposing of 
your old unit and packaging from t he new one can be obtained from your local council office.
When disposing of an old unit break of any old locks or latches and remove the door as a safeguard.

CORRECT DISPOSAL OF THIS PRODUCT

This marking indicates that this product should not be disposed with other household wastes 
throughout the EU. To prevent possible harm to the environment or human health from uncontrolled 
waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To 
return your used device, please use the return and collection systems or contact the retailer where 
the product was purchased. They can take this product for environmental safe recycling.

For more information, please contact the local authority or your retailer where you purchased  
the product.

Attach your receipt 

to this page

Summary of Contents for Classique IBM323W














Reviews: