Inalsa RAPID COOK, Instruction Manual

Page: 10 / 10

CHECKING POINT
Whether the plug is removal from the outlet.
Whether power switch or fuse in your home
is cut off.
Whether power is cut off
Whether the pan is proper
Whether the pan is centered on the hotplate
Whether the bottom diameter of the pan is
more than 12cm
Whether ambient temperature is very high.
Whether gas intake or vent is jammed.
It means reaching the set temperature when
the unit is at warming state.
Protection equipment may operate confirm it
after wait several to 10 minutes.
Whether the pan bottom is concavo - convex
or the bottom center is concave.
Whether power indicator is lighted.
TROUBLE SHOOTING GUIDELINE
TROUBLE
When plug is inserted into the power outlet,
a deep sound will not be lighted when
pressing ON/OFF key
Continuous 15s beep sound will be heard
and then the unit stop operating.
The unit stops heating suddenly during use
The temperature can not be controlled when
frying or grilling food.
The induction cooker will stop heating if the following malfunctions occur, after 3s, the
display will show the malfunction alarm, the malfunction code will show on the center of
display, you can clear the display by pressing the switch button, and the appliance will enter
the standby state.
DISPLAY DIRECTION
E0 Check whether the pan is in place
E1 The circuit is malfunctioned
E2 The temperature sensor is open - circuited or short - circuited
E3 The voltage is higher (260V-275V)
E4 The voltage is lower (145V-165V)
E5 The cooker surface temperature is higher
E6 IGBT temperature is higher than 95°C for 3s
E7 The IGBT temperature sensor is open - circuited or short -
circuited
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment !
Please remember to respect the local regulations: hand in the non - working
electrical equipments to an appropriate waste disposal center.
9