11. Do not use the appliance in rooms having area less than 4m².
12. Do not connect the appliance to extension cords or multiple outlets.
13. Do not let the cord to hang over the sharp edges or hot surfaces.
Before First Use
After unpacking the unit and before any use, make sure the all parts of
the unit and all its attachments are not damaged.
How to Assemble
The wheels must be fitted to the heater in accordance with the details
below.
NOTE: - It is important that the wheel assemblies are fitted to the correct
(i.e. bottom) end of the heater.
1. Turn the heater upside down.
2. Position the wheel mounting plates between the end fins.
3. Attach them to the heater using the U-bolts and wing nuts supplied.
4. Tighten the wing nuts
.
5. Attach the castors to the plates with the nuts provided.
How to Use
When the heaters are turned on for the first time or after having not
been used for a long period, the heaters may emit some smell and
fumes. This will disappear when the heater is ON for a short while.
1. Choose a suitable location for the heater, taking into account the safety
instructions above.
2. Insert the plug of the heater into a suitable socket.
3. Select heat setting as per your need by turning the heat selector switch.
4. Turn the thermostat control clockwise as far as it will go. The indicator
light on the selected power switch will glow ON.
5. When the desired room temperature has been reached, the thermostat
knob should be turned slowly anti. Clockwise until the thermostat is
heard to click off and the lights on the rocker switches are seen to go out.
After this the heater will keep the air temperature in the room at the set
temperature by switching on and off automatically.
A
4
