4
Don'ts
1. Do not use the appliance in the vicinity of showers, bathtubs,
washbasins, swimming pools etc.
2. Do not use outdoors. This product is for household use only.
3. Do not use the appliance in rooms having area less than 4m².
4. Do not insert sharp objects in the grill openings, as this may cause an
electric shock, fire or damages to the heater.
5. Do not leave the appliance unattended. Always turn off the appliance
before leaving.
6. Do not let the cord to hang over the sharp edges or hot surfaces.
7. Do not cover. If covered, there is the risk of overheating.
8. Do not use the heater in the rooms with explosive gas or while using
inflammable solvents, varnish etc.
9. Do not immerse the heat convector in water.
How to Use
1. Place the heater on a stable, plane and heat resistant surface.
2. Insert the power plug into the power socket, with the power switch in the
OFF position and the thermostat control knob at minimum position.
3. Turn on the switch to fan mode ( ) and then to 1000W (
) setting or
2000W (
) setting as desired.
4. Set the thermostat to the maximum temperature setting.
5. The neon indicator will glow when the heater is ON.
5. When the switch is set at fan mode position, the fan will start
immediately. No heating will occur in the fan mode position.
6. Once the room temperature stabilizes with maximum temperature
setting, reset the thermostat to desired level.
Safety
Automatic shut-off device
The automatic shut-off device protects the appliance from any
inadvertent abnormal overheating, malfunction by shutting down the
entire heating system within seconds of the failure's occurrence. After
the automatic shut-off device has been activated due to heating
overload, the cause such as a drape or any other obstruction, or a tipped-
over unit, that must be corrected, removed before it automatically
resets.
