UNSER MANUAL
OPERATION
Plug the amplifier into a free USB port on your PC, MAC or laptop using the USB A plug [1]. The
amplifier is supplied automatically with a current via the USB connection and switched on. The
operating system will load the required driver the first time you make the connection. This can take a
short while.
Plug the headphones into the headphone connection [2].
Set the desired volume suing the + button [3] and the - button [4].
SCOPE OF DELIVERY
1 x Premium Headphone Amp No. 2
1 x operating manual
TECHNICAL DATA
Output rating:
maximum 2 x 320 mW
Impedance:
8–300 ohms
Signal-to-noise ratio:
96 dB
Crosstalk attenuation:
60 dB
Amplification:
0 dB
Distortion factor:
< 0.008% (10 mW)
Frequency range:
22 Hz – 65 kHz
DISPOSAL
Old or defective devices that are labelled with a crossed-out rubbish bin may not be
disposed of with conventional household waste. They must be handed in at local recycling
centres in accordance with the applicable national legislation. Proper disposal helps to
conserve resources and protect the environment.
Note: All product images similar. We reserve the right to make changes.
Made in China
07
