inada DREAMWAVE HCP-11001A, Operating Manual

Page: 9 / 95

7
C
O
M
P
O
N
E
N
T
S
&
D
E
S
C
R
IP
T
IO
N
COMPONENTS & DESCRIPTION
Remote Control
Warning
●
Do not spill water and/or other liquids on the remote control.
●
Do not handle the remote control with wet hands.
●
Do not sit on the remote control. Do not drop or step on the remote control. Do not pull the remote control cord forcibly.
●
Do not use pointed or hard objects to push the buttons or display on the remote control.
→
May result in damage to the remote control.
Remote Control Display
Information, such as massage action descriptions, status
of progress, and the intensity and speed of the massage
in progress, is displayed with both characters and
symbols. (See next page.)
Preset Programs
For selecting a program with the corresponding course
name
ROLLER Buttons
During Preset Programs, roller shoulder positions can
be adjusted using [ ] and [ ] immediately after the
Shiatsu points are located.
In Manual Selection Mode, roller positions can be
adjusted using [ ] and [ ].
BACK 3-D Buttons
For adjusting the intensity of massage stimulation on
the back, use [
＋
] and [
−
].
EMERGENCY STOP Button
Use this button to shut the chair off immediately in an
emergency or if there is a malfunction during operation
of the chair.
The rollers will stop immediately.
AIR LEVEL Button
For adjusting the intensity of air pressure in 3 settings
(high, medium, and low) during Preset Programs
VIBE OFF Button
Cancels vibration operation during any Preset Program.
POWER Button
For turning the remote control power ON or OFF.
Pushing the POWER button while the chair is activated
causes the rollers to return to their storage positions
before the chair is shut off.
The button is lit in green while the power to the remote
control is on, in orange while the power is off, and in red
while the chair is stopped in an emergency.
If pressed during a Preset Program, your chair will
automatically resume to an upright position.
LEG REST Buttons
Use [ ] and [ ] to adjust the angle of the leg rest.
RECLINE Buttons
Use [ ] and [ ] to adjust the angle of the reclining seat
back.