IN2UIT Collage Owner'S Manual Download Page 3

 

 

FCC Statement: 

 

Federal Communication Commission Interference Statement 

 

This equipment has been tested and found to comply with the limits for 

a Class B digital device, pursuant to Part 15 of the FCC Rules. These 

limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, 

uses and can radiate radio frequency energy and, if not installed and 

used in accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no guarantee 

that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one of 

the following measures: 

    Reorient or relocate the receiving antenna. 

    Increase the separation between the equipment and receiver. 

    Connect the equipment into an outlet on a circuit different from that 

to which the receiver is connected. 

    Consult the dealer or an experienced radio/TV technician for help. 

 

 

 

FCC Caution: Any changes or modifications not expressly approved by the 

party responsible for compliance could void the user’s 

authority to operate this equipment

This device complies with Part 15 of the FCC Rules. Operation is subject to 

the following two conditions: (1) This device may not cause harmful 

interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation. 

 

Summary of Contents for Collage

















Reviews: