-
16
-
2.5.3
Attach the inner rail to the chassis
Step 1: Install the inner rail onto the chassis. Make sure the key holes and the standoff are
well locked which you will hear a click.
Step 2: Repeat the same action to the other side.
Step 3: When removing the inner rail, pulling the latch upward and release the keyhole from
standoff to detach the inner rail. (Action
and
in the figure)
2.5.4
Mount the rail bracket to the cabinet
Step 1: Extend the bracket over the rear rack of the cabinet.
Step 2: Pull back to and push bracket’s standoff into the screw holes on the rack, if your
action is correct, you will hear a click.
Step 3: Extend the opposite side of bracket to the front rack of the cabinet.
Step 4: Pull the bracket to let the standoff over the screw holes on the front rack until you
hear a click.
Step 5: The other side of rail is symmetrical, repeat the installation Step 1-4.
Step 6: Once you would like to detach the bracket, pull the release tab on the rear bracket
and Pull the latch on the front bracket to release the bracket. Repeat the same action
to the other side.
Step 1
Step 2
Step 3
Step 1
Step 2
Step 3
Summary of Contents for IW-RS316-03
Page 1: ...IW RS316 03 User s Manual...
Page 4: ...3...
