In the Garage AG – Zumikerstrasse 24, Zollikon 8702 Switzerland
2 / 3
Instructions
Note: It should take about 15 minutes to set up the Car Shield/Bike Shield once unpacked. We
recommend two people. This product is for indoor use only!
1.
Unfold the Car/Bike Shield and place it where it will be located when inflated.
2.
Fully unzip it and move the clear plastic top portion to the front and out of the way
3.
Drive your vehicle onto the center of floor
4.
Roll the clear plastic top over your vehicle to full cover it
5.
Install the
Fan
by placing the Velcro panel on the inside of the Car/Bike Shield. Press hard
6.
With the
AC Adaptor
outside the device, run the power wire through the purpose-made slit and
connect to
Fan
. (do not plug in an electrical socket yet as you first need to install the
Filter
)
