
•
RETAIL 12 MONTH LIMITED WARRANTY
ASA Electronics (ASA) warrants to the original retail purchaser of this iN-Command product that should this
product or any part thereof, under normal use and conditions, be proven defective in material or workmanship
within 12 months from the date of original purchase, such defect(s) will be repaired or replaced (at ASA’s option)
without charge for parts and repair labor.
This warranty does not extend to the effects of this device on other devices, to costs incurred for removal or
reinstallation of the product, or to damage of any product, accessories, or electrical system(s). This warranty does
not apply to any product or part thereof which, in the opinion of the company, has been damaged through alteration,
improper installation, mishandling, misuse, neglect, or accident.
THE EXTENT OF ASA’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR
REPLACEMENT PROVIDED ABOVE, AND, IN NO EVENT, SHALL ASA’S LIABILITY EXCEED THE PURCHASE
PRICE PAID BY THE PURCHASER FOR THE PRODUCT.
Disclaimer:
This product is only to be used as a precautionary warning and to provide user as convenient secondary safety
equipment. Please follow the standard installation procedures or ask a qualified tire shop to install the product. If
the tire has been damaged or a traffic accident resulting from improper driving behavior occurs, the company will
not be responsible for any civil or criminal liabilities.
• TROUBLESHOOTING
After inputting the sensor ID number into the APP, the dialogue display remains without a value.
TPMS sensor only transmits data when the sensor is on a vehicle that is going over 20 miles per hour, the
tire pressure changes 5 PSI, or when the battery is installed.
During other times, data will not be transmitted in order to save power. You can check if the TPMS sensor
is working normally through tire pressure increase or deflation.
Smart phone has completed the installation of the APP, the sensor ID settings are done, and the car is being driven,
but no data is shown.
Check if Bluetooth was turned off and restart the app.
If you experience an intermittent signal, close all other apps. (Wireless audio streaming via Bluetooth may
cause interruptions in signal.)